Lift up the arm of the keurig mini to get it out of the way. Hold the water tube at its base while pinching it tightly. While maintaining pressure on the tube, slide your fingers along until the tip to push out any material clogging the hose Repeat this process until all obstructions are removed. … Read more
If water is leaking at the base of the machine, the K-cup holder could be cracked. This would allow water to seep through. First check near the K-cup holder of the machine to locate any possible cracks. Once found, the K-cup holder must be replaced using this guide. Why does water come out of the … Read more
Why does my reusable k-cup leak? Reusable k-cups leak because there isn’t a tight seal around the needle that enters the top of the reusable k-cup When the machine releases water through the needle, the water builds up and leaks through the top hole on the reusable k-cup where the needle entered. Why do my … Read more
That’s why you’ll want to run a cycle or three of just water through your brewer. Fill the reservoir with water and don’t add a K-Cup. Push the brew button and discard the water that comes out. Your keurig mini should now be fully unclogged and ready to brew. How do you unclog a Keurig … Read more
The first is simply overfilling the water reservoir , which can be easy to do with machines like the K-15 Mini. It could also be a matter of the machine being clogged, in which case a good clean will remedy the issue. Another common cause of leaking is a loose or broken upper gasket. Why … Read more
The most likely reason for a Keurig not pumping water is water scaling, debris that builds up and interferes with the Keurig water pump There are a number of ways to resolve this problem. The simplest is to take out the Keurig water reservoir, empty it out, and refill it about a third of the … Read more
Lift up the arm of the keurig mini to get it out of the way. Hold the water tube at its base while pinching it tightly. While maintaining pressure on the tube, slide your fingers along until the tip to push out any material clogging the hose Repeat this process until all obstructions are removed. … Read more
The most likely reason for a Keurig not pumping water is water scaling, debris that builds up and interferes with the Keurig water pump There are a number of ways to resolve this problem. The simplest is to take out the Keurig water reservoir, empty it out, and refill it about a third of the … Read more
If everything on your machine looks right but your Keurig still won’t brew, it’s time for a reset. To reset your Keurig, open and close the brew head, and then turn it off and unplug it from the wall. Remove the water reservoir, if you can, and let the machine sit for at least half … Read more
The most likely reason for a Keurig not pumping water is water scaling, debris that builds up and interferes with the Keurig water pump There are a number of ways to resolve this problem. The simplest is to take out the keurig water reservoir, empty it out, and refill it about a third of the … Read more