Calibration is simply the process of adjusting your grinder, moving the blades of the grinder closer or further apart, to ensure you get your desired outcome from the coffee That outcome could be consistency or based on hitting a specific coffee recipe or hitting a specific taste/flavour.
How do you adjust grind?
- Decide what adjustment (finer or coarser) you require and move the collar
- Turn on the grinder for 10 seconds and discard that grind (it will still be on the old setting).
- Run a test shot keeping dose and tamp technique consistent.
What is grinder calibration?
Calibration is simply the process of adjusting your grinder, moving the blades of the grinder closer or further apart, to ensure you get your desired outcome from the coffee That outcome could be consistency or based on hitting a specific coffee recipe or hitting a specific taste/flavour.
What setting should my coffee grinder be on?
Coarse (usually the higher settings) is best for a cold-brew machine and a French press because they have a longer steeping process that needs bigger grounds. Medium-sized grounds are best for your everyday hot cup of drip coffee.
How often should the grinder be calibrated?
Calibrating a grinder so that you can pull a relatively regular espresso should be done as often as possible. Depending on the grinder and the espresso machine, calibration should be done at least three times a day , ideally. Before the morning rush, before the lunch rush and before the evening rush are good times.
Why is coffee calibration important?
Calibration is important because it enables communication between collaborators – and with your future self It’s possible to make good coffee with volumetric measurement, or even a scale that has gone out of calibration, thanks to the fact that coffee brewing is based around ratios.
What happens if the grind is too coarse?
When the grind is too coarse, the grounds will not pack tightly together, and the water will pass through them too quickly The extraction will be too fast, and the drinks will be weak. You must make the grind finer. If the extractions take longer than 30 seconds, they will be bitter.
When the grind is correct it should feel?
The puck is the used coffee grounds in the portafilter. If your grind was right, the grind should stick together in a solid round ‘puck’. It should be firm and dry, easily snapping into 3-4 pieces.
What happens if espresso grind is too fine?
Grinds too fine can settle and pack together in the basket of the espresso machine, clogging an otherwise even mesh and stymieing water’s journey through. As a result, some cups end up bitter, while others end up sour; a few taste strong, a few taste weak.
How do you align a conical burr?
When aligning flat-burr grinders we normally use thin pieces of metal foil to align the burrs – but before using metal foil, another method is to start by mounting the burrs in the different positions, just by rotating the burrs.
How do you align the fellow ode burrs?
- Unplug Ode.
- Turn grind dial to setting 11 (do not adjust to setting 1 as instructed in the video)
- Pull gently on the faceplate to remove.
- Remove the four M3 screws surrounding the dial.
- Pull to remove grind dial to reveal calibration dial.
- Plug Ode back in.