This iteration of the ecm synchronika comes equipped with a flow control device , allowing you to directly control the flow rate of your extraction. This flow profiling offers an extra layer of experimentation that can unlock the potential of your brew.
What is ECM flow?
ECM Flow Valve device allows the user to manually adjust the flow of the water inside the brewing head and manually control the profile of the coffee extraction.
Is ECM and Profitec the same?
The Profitec 700 is almost identical to the ECM , but some of the fit and finish is not quite up to the same standards. The Rocket uses different internals, such a smaller set of brass boilers instead of the stainless steel ones on the ECM.
Where is ECM Synchronika made?
The ECM range is presently manufactured at two locations. The single-boiler and heat exchanger models continue to be manufactured in Italy, while the dual-boiler Synchronika model, the commercial machines, and the entire range of grinders are also handmade in Germany.
How does e61 flow control work?
This flow control device adjusts the flow of water through a needle valve which controls the pressure applied by the pump on the grouphead , thereby controlling the quantity of water that flows through your espresso.
Which is better ECM or rocket?
The ECM Mechanika V Slim is a good inch slimmer (heh) than the Rocket Appartamento While this is a marginal difference many of our customers enjoy narrower machines since they appear to take up less space in the kitchen, helping them feel a bit less imposing.
Are rocket and ECM the same company?
“In July of 2007 the Rocket Espresso Group purchased from the Italian company ECM the Intellectual Property and full rights to the entire domestic espresso machine portfolio being produced and obtained a full restraint of trade from them.
Is ECM a good brand?
The 7 Best ECM Espresso Machines in 2022. There are no bad ECM espresso machines! They’re known for their incredible espresso, best-in-class build quality, and stunning design. According to CEO Michael Hauck, the brand pairs past and present technology to create these modern yet timeless machines.
Which is better double boiler or heat exchanger?
A two group, dual boiler machine can effectively double your capacity With this type of machine you could have two baristas brewing and steaming at once, solving speed issues you might be experiencing. They are also more precise than heat exchangers because of the dedicated boiler.
Are rocket espresso machines worth it?
Here’s the deal – the Rocket espresso R58 is a fine machine that any kitchen would be proud to host If you use it right, it will serve you well for a long, long time. It’s a sweet machine and it has some great features. With this machine, you will be able to make café quality espresso at home.
Where is Profitec made?
The production Our espresso machines and grinders are manufactured in our production facilities in Bammental and Mauer (near Heidelberg) We assemble each part by hand. We want you to be satisfied and therefore we work with the greatest care and passion on every single detail, for the perfect espresso machine.
Where are rocket coffee machines made?
ROCKET ESPRESSO Designed and hand-made in the heart of Italy , each machine is built for perfection and designed to integrate seamlessly into your kitchen.
What is an e61 group head?
E61 group heads are an espresso machine group head design that have been around since 1961. It’s a design that is very tried and true and is one that is used on many of our prosumer grade espresso machines and even some commercial machines like the Faema Legend and the Faema Jubile.
How long does ECM Synchronika take to heat up?
The ECM Synchronika takes around 20 minutes to fully heat, so ensure you’ve allowed enough time for the machine to reach its full temperature for the coffee boiler.
Are ECM coffee machines any good?
ECM espresso machines are legendary for their build quality , and for good reason, they are designed by German engineers and assembled by hand in Italy. The Classika is a single boiler machine with E61 thermosyphon brew group and a half liter stainless steel boiler.
What is E61 flow control device?
With the Quick Mill E61 group head flow control device you can manually profile your extractions by adjusting the flow from the closed position (0-bar) to full pump pressure, usually 9-bar This E61 flow control device can work on many common machines like the ECM flow control device does.
How important is flow control espresso?
By controlling the flow rate of water, you have the ability to bring out all of the nuances of your coffee For example, with a very fresh or “overly fresh” coffee, you can set a flow that will allow the coffee to off-gas and bloom so you can get a nice extraction.
How does a flow control valve work?
The purpose of a flow control valve is to regulate the flow rate in a specific portion of a hydraulic circuit In hydraulic systems, they’re used to control the flow rate to motors and cylinders, thereby regulating the speed of those components. The energy transfer must be equal to the total work done.